Minwax® Performance Series Tintable Wood Stain 250 VOC

Available only at Sherwin-Williams. Minwax Performance Series Tintable Wood Stain 250 VOC is a rich, thick, oil based formula that provides a beautiful, long-lasting finish. It applies easily and penetrates deep into the pores of the wood. The Minwax Performance Series Tintable Wood Stain 250 VOC can be recoated in in 12 hours for solvent –based finishes and 24 hours for water-based finishes.


  • Tintable in a wide array of colors for design flexibility and color matching
  • Oil-rich penetrating protection
  • Minimal grain-raising of the wood, much better than water-based stains
  • Penetrates and seals bare wood and reists lap marks
  • Recoat in 12 hours for solvent-based finishes and 24 hours for water-based finishes

Reviews

PROJECT INSPIRATION

Get Inspired

See what’s possible, and then make it happen. Tag @minwaxusa on Instagram to have your project featured.

Application Directions

  • Preparation Warning
    Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.
  • PROTECT
    This product should be topcoated for best appearance and durability. If finishing with Minwax Performance Series Fast-Dry Varnish or Minwax Performance Series Polyurethane Varnish, allow 2 hours drying before topcoating. If finishing with Minwax Performance Series Waterborne Polyurethane, allow 6 hours drying before topcoating.
  • CAUTIONS
    CAUTIONS: ALIPHATIC HYDROCARBONS. Contents are COMBUSTIBLE. Keep away from heat and open flame. VAPOR HARMFUL. Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. FIRST AID: In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN. DANGER: Rags, steel wool, other waste soaked with this product and sanding residue may spontaneously catch fire if improperly discarded. Immediately place rags, steel wool, other waste soaked with this product and sanding residue in a sealed, water-filled metal container. Dispose of in accordance with local fire regulations.

Data Sheets:

Product Number Base Container Size SDS PDS
027426725003 Clear Base 1 Gallon SDS PDS
027426755000 Clear Base 1 Quart SDS PDS