Minwax® Helmsman® Teak Oil

Helmsman® Teak Oil protects dense woods and enhances wood grain by penetrating into wood pores, restoring the wood's natural warmth and richness.


  • Apply periodically to refresh your dense woods and help protect them from UV rays.
  • Helmsman® Teak oil is recommended for outdoor and indoor wood furniture, and marine surfaces above the water line.
  • Restores the wood's natural warmth and richness

Reviews

From Real Homes

Get Inspired

See what’s possible, and then make it happen. Tag @minwaxusa on Instagram to have your project featured.

Application Directions

  • Preparation Warning
    Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.
  • PREPARATION
    • Surface must be dry and free of old finishes such as varnish, paint, polish, wax, grease, dirt, and subsurface moisture.
    • If desired, sand to obtain smooth, uniform surface.
  • APPLICATION
    • Lightly shake container for 15 – 20 seconds.
    • Brush or wipe on a generous amount of Helmsman® Teak Oil.
    • Allow Helmsman® Teak Oil to penetrate into wood for 5 – 10 minutes. Do not wipe off any excess.
    • Apply a second coat and leave on for an additional 15 – 20 minutes. (Do not leave product on wood in excess of 30 minutes total.)
    • Wipe surface completely dry.
    • Ready for use in 6 – 8 hours.
  • CAUTIONS
    DANGER: Rags, steel wool, other waste soaked with this product, and sanding residue may spontaneously catch fire if improperly discarded. Immediately place rags, steel wool, other waste soaked with this product, and sanding residue in a sealed, water-filled, metal container. Dispose of in accordance with local fire regulations. CAUTIONS: CONTAINS ALIPHATIC HYDROCARBONS. Contents are COMBUSTIBLE. Keep away from heat and open flame. VAPOR HARMFUL. Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. FIRST AID: In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN.

Data Sheets:

Product Number Base Container Size SDS PDS
027426671003 Clear 1 Quart SDS -
027426771000 Clear 1 Quart SDS -
027426571006 Clear 1 Pint SDS -